ΕΞΟΠΛΙΣΜΟΣ
Ο εξοπλισμός μας περιλαμβάνει πολλά διαφορετικά είδη μηχανημάτων κοπής, όσο και άλλα σύγχρονα συστήματα και μηχανήματα. Για την κατασκευή των προϊόντων μας χρησιμοποιούμε επίσης πολλά διαφορετικά υλικά . Από σκληρό ανοξείδωτο ατσάλι έως πολλά είδη φύλλων γραφίτη, ότι ταιριάζει καλύτερα στην ζητούμενη παραγγελία. Παρακάτω σας δίνουμε μερικές ενδεικτικές πληροφορίες για τα κύρια εργαλεία μας …
Σύστημα Υδροκοπής 6 Αξόνων
Στον απαιτητικό τομέα της κοπής και διαμόρφωσης σκληρών μετάλλων και τιτανίου, η εταιρεία μας χρησιμοποιεί έναν υπερσύγχρονο Σύστημα Υδροκοπής 6 Αξόνων. Οι δυνατότητες κοπής και διαμόρφωσης που μας προσφέρει αυτό το σύστημα είναι απεριόριστες. Εν συντομία, αναφέρουμε τα ακόλουθα χαρακτηριστικά κοπής που προσφέρει το Σύστημα Υδροκοπής 6 Αξόνων της εταιρείας μας:
- Δυνατότητα κοπής υλικών πάχους εώς και 200 mm.
- Δυνατότητα Περιστροφικής Κοπής.
- Δυνατότητα κοπής μεγάλης ποικιλίας υλικών. Αυτό περιλαμβάνει: Ανοξείδωτο χάλυβα, τιτάνιο, αλουμίνιο, χαλκό κ.λπ.
- Μηδενική θερμική καταπόνηση του προς επεξεργασία υλικού.
- Υψηλές ταχύτητες κοπής.
- Δυνατότητα κοπής με κλίση έως 37 °.
- Ομαλές και άψογες ακμές του αντικειμένου που έχει υποστεί επεξεργασία.
WATERJET | WIRE EDM | LASER | PLASMA | MILLING | |
---|---|---|---|---|---|
ACCURACY | Average of ±0.003" (±0.08 mm) and up to 0.001” (±25 μ) 1 | ±0.0001" (±2.5 μ) | ±0.001" (±25 μ) 2 | ±0.030 to ±0.060" (±0.75 to ±1.55 mm) | ±0.0003" (±8 μ) |
THICKNESS | 3" (75mm) or more for some applications | 12" (30 cm) | Generally less than 0.25"(6.35mm) | Cuts less than 1.25" | Able to work on 3D parts |
CUTTING SPEED | 5-10 times faster than EDM when thickness is under 1" | 5-10 times slower than waterjet | Very fast cutting in thin, non-reflective materials | Fast with thin sheets | Fair |
EDGE QUALITY | Good | Excellent | Excellent | Fair | Excellent |
MATERIAL DISTORTION | No Distortion | No | Possible | Possible | No |
HEAT AFFECTED ZONE (HAZ) | None | Some | Yes | Yes | No |
MATERIAL LIMITATION | Works in virtually all materials except really hard ceramics | Only works in conductive materials | Only non-reflective metals | Generally works in metals | Not ideal for very large parts |
PROCESS | Cold supersonic abrasive used to cut material | Spark erosion used to remove material from electrically conductive materials | Thermal process | Thermal process | Mechanical cutting tool |
SETUP | Fast and easy set-up | Relatively easy set-up | Relatively easy set-up but may have to tune laser for different materials | Relatively easy set-up | Time consuming set-up and programming |

LASER CNC Cutting Machines
Our arsenal also includes two CNC Laser machines, which are mainly used for cutting and manufacturing metal parts and components.
Laser cutting also offers us excellent cutting accuracy and allows us to quickly build large product lines with absolute homogeneity and smooth surfaces, which when ready to cut are ready for any further processing, without the need for any additional treatment.
Steel Sheet Cutting
Graphite Sheet Cutting
Rubber Sheet Cutting
Tire Cutting for Use in Electrical and Electronic Equipment.
PTFE Parts Cutting
MICA Cutting for Use in Electrical and Electronic Equipment.
3D MULTIAXIS SCANNER

For our design services and for accurate measurements or modeling of required components and prototypes, we use a 3D Armor Scanner with perfectly accurate measurement capabilities.
The use of 3D scanning technology as a tool is a one-way street in modern engineering as it offers us the capability for reproduction and construction of complex components in cases such as when it is difficult to find a ready-made spare part or requires the manufacture of a custom component. With the scanning model, we are able to build any kind of accessory regardless of size or complexity.
Information will be added soon. Please check again in a few days…
3D PRINTERS

Combined with 3D Scanning, we use state-of-the-art 3D printers, so in case, for example, of creating a prototype, we have the ability to print the digital model that came from 3D Scanning or was designed from scratch, in 3D printer, thus creating the necessary standard required for real-world testing.
This test makes it safer to transport the component to production, as this method eliminates the possibility of producing a large number of defective components.
Sample images will be added soon. Please check again in a few days…